I plan to build an ADS-B tracker. However, I live in an RF noisy urban neighborhood, and all that noise can desense an RF receiver, so I bought this FlightAware Dual UAT+ADS-B filter. I put it on the spectrum analyzer and I measured a passband from ~930Mhz to ~1.2Ghz with ~1.5dB of insertion loss. Since this is all up in the gighertz range, my plan is to keep the antenna feedlines short by mounting a raspberry pi 4 in a weather-rated enclosure close to the antenna. I’ll power all of it by running a network cable with POE to the raspberry pi with a POE hat.